Neospray is a high-performance, non-toxic, odourless, colourless and tasteless lubricant solution for cleaning and lubricating dental instruments with care. Leading Technologies for The 1st Time in Dentistry
Advantages
Effective lubrication and reduced debris collection
Protects from corrosion, reduces friction & wear rate increasing the lifespan of the instruments
Applications
For high-speed, low-speed dental hand-piece equipment like air turbine, air motor, heads, prophy angle/ contra-angle etc
Net Contents:
Main Unit ? 500ml
Nozzle
Net Qty. 1 Unit
Neospray
Brief Guide to Clean Your Endomotor:-
Step 1- Detach the contra-angle from the motor hand-piece and clean the surface
Step 2- Connect one end of the nozzle (comes with the motor) to Neospray and the other (black ring end) to the base of the contra-angle. They should fit well.
Step 3- Cover the contra-angle surface with tissue paper and while holding the Neospray bottle upright- spray for 2-3 seconds with full pressure.
Step 4- Keep wiping off the debris that oozes out of the shank side and repeat until clear oil comes out.
Step 5- Wipe off excess oil from the surface and position the contra-angle vertically for 2-3 hours to allow excess oil to drain out.
Step 6- Shrink-wrap the contra-angle in sterile barrier packages. At a temperature of 135 degrees C, the sterilization time is at least 4 minutes and at 121 degrees C, it is at least 35 minutes. Drying time for at least 15 minutes.
The handle/ plastic body is NOT approved for device-based cleaning (washer-disinfector) and sterilization.